3.23Stand-alone FaxSpeed DiallingYou can store up to 80 numbers in 2-digit Speed Dial locations (01-80).Storing a Number for Speed Dialling1. Press and hold Speed(#) for about 2 seconds.2. Enter a 2-digit location number (01 through 80) where you want tostore a number, then press Start/Enter.If a number has already been stored in a location, the display showsthe number. To edit the number, see the next page.3. Enter the number you want to store, then press Start/Enter.4. To assign a name to the number, enter the desired name. Forinformation on how to enter names, see page 3.19.If you do not want to assign a name, skip this step.where xx represents thespeed location you haveselected at step 2.LOC. [01-80] ❿##Sxx:05512637522Using Address LabelA One-touch label sheet is included with your machine. As you storenumbers in one-touch dial buttons, make a note of the numbers on thelabel to remind you which number is stored in each position.1. Remove the clear cover andlabel.2. Write information on thelabel and replace the labeland cover.You may want to use pencilin case you wish to changethese numbers later.