Samsung SF3000 Operator's Manual

Contents

4.10 CHAPTER FOUR : THE FAX MACHINE4THE F AX MACHINE1Press RCV. Moderepeatedly until ‘TAD’ isdisplayed.ResolutionFlashRcv.ModeRedial/PauseVolume/Scroll2When a call comes in, theanswering machineanswers and stores thecaller’s message if theyleave one.If the machine detects afax signal, it goes intoreceive mode.Receiving in TAD Mode (SF3000)Notes:• If you have set your machine to TAD and your answering machine is switched off, or the answeringmachine is not connected to your fax machine, the machine will automatically go into receive modeafter several rings.• If your answering machine has a ‘user-selectable ring counter’, set the machine to answer anincoming call within 4 rings or less.• If the sound level of the call is too low because of a poor phone connection, the fax machine oranswering machine may not work properly.• When you are using manual reception mode on your machine, and you have an answering machine,you must make sure you switch off the answering machine, or the outgoing message will interruptyour phone conversation.• Not all answering machines may work with your fax machine.• When your answering machine answers an incoming call, it record a fax tone until it realises it is afax coming through. Your answering machine may tell you a voice message has been left, when it isactually a fax.In Standby Mode, TADappears in the right sideof the display. 2 0 - J U N 1 0 : 3 0 T A D0-Chapter 4-1(GODREJ) 9/20/98 5:13 PM Page 2