1245. To make your device visible tap Visible to place a checkmarkin the selection box.• Making your device visible allows it to be detected by otherdevices for pairing and communication.6. To set how long your device will remain visible, tap Visibletime-out and tap a time (2 Minutes, 5 Minutes, 1 Hour, Never) .7. To scan for visible Bluetooth-compatible devices tap Searchfor devices.Pairing Bluetooth DevicesThe Bluetooth pairing process allows you to establish trustedconnections between your device and another Bluetooth device.When you pair devices, they share a passkey, allowing for fast,secure connections while bypassing the discovery andauthentication process.To pair your device with another Bluetooth device:To pair your device with another Bluetooth device:1. Verify Bluetooth is active.2. From the Bluetooth settings page, tap Visible.Your device must be visible to successfully pair with anexternal device.3. Tap Search for devices. Your device will display a list ofdiscovered in-range Bluetooth devices.4. Tap a device from the list to initiate pairing.5. Enter the passkey or PIN code, if needed, and tap OK.6. The external device will then have to also accept theconnection and enter your device’s PIN code.Once successfully paired to an external device,appears within the Status area.Note: Due to different specifications and features of other Bluetooth-compatible devices, display and operations may be different, andfunctions such as transfer or exchange may not be possible with allBluetooth compatible devices.Note: Pairing between two Bluetooth devices is a one-time process. Once apairing has been created, the devices will continue to recognize theirpartnership and exchange information without having to re-enter apasscode again.Disconnecting a paired deviceDisconnecting a paired device breaks the connection between thedevice and your phone, but retains the knowledge of the pairing.At a later point when you wish to reconnect the device, there is noneed to setup the connection information again.