Picture Messages7811.Repeat steps 7 to 10, as needed. You can enterup to 10 destinations.If you want to edit the destinations, select oneand press the Select soft key. You can changeor delete it.12.After entering the destinations, press the Selectsoft key when Send Message highlights.Your phone sends the message.Delete All (Menu 2.4)You can delete all of the messages in Inbox orOutbox.When a confirming message appears, press the Yessoft key to confirm.Setup (Menu 2.5)You can change the default settings for sending orreceiving picture messages.To place or remove a check mark on an option,press the Select soft key.The following options are available:Hide ID: When this option is checked, your phonenumber does not display on the recipient’s phone.Delivery Report: When this option is checked, thenetwork informs you whether or not your messagehas been delivered.Picture Messages79Read Reply: When this option is checked, yourphone sends a request for a reply along with yourmessage to the recipientAuto Download: When this option is checked,your phone automatically downloads the receivedpictures or sounds.MMS Profile (Menu 2.6)In this menu option, you can configure varioussettings that are required when you send or receivepicture messages.Notes:• The last profile you accessed is activated for sendingmessages.• In most cases, you don’t need to change thesesettings. If you change them without the serviceprovider’s instructions, the MMS feature may notwork properly.For each profile, the following options are available:Profile Name: enter the name that you wish toassign to the MMS server.Connection URL: enter the URL address of yourMMS server.Security: select a data transmission mode. ChooseSecure to protect your data against unauthorisedaccess; otherwise, choose Non-Secure.IP Address: enter the gateway address required toconnect to the MMS server.User Name: enter the user ID required to connectto the MMS server.