Wireless network setup1872. Using a Network-Connected Machine11 After searching, the window shows the wireless network devices. Selectthe name (SSID) of the access point you want to use and click Next.If the wireless network is already set up, the Wireless NetworkInformation window appears. Select I want to install software withthe current settings. (Recommended). Then, click Next.When you set the wireless configuration manually, click Advanced Setting.• Enter the wireless Network Name: Enter the SSID of the access point(SSID is case-sensitive).• Operation Mode: Select Infrastructure.• Authentication: Select an authentication type.Open System: Authentication is not used, and encryption may or maynot be used, depending on the need for data security.Shared Key: Authentication is used. A device that has a proper WEP keycan access the network.WPA Personal or WPA2 Personal: Select this option to authenticate theprint server based on the WPA Pre-Shared Key. This uses a shared secretkey (generally called Pre Shared Key pass phrase) that is manuallyconfigured on the access point and each of its clients.• Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES,TKIP, AES)• Network Password: Enter the encryption network password value.• Confirm Network Password: Confirm the encryption networkpassword value.• WEP Key Index: If you are using WEP Encryption, select the appropriateWEP Key Index.The wireless network security window appears when the access point hassecurity enabled.Enter the Network Password of the access point (or router).12 If your printer supports Wi-Fi Direct, the following screen appears.Click Next.• Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager(see "Setting up Wi-Fi Direct" on page 193).• Wi-Fi Direct Name: The default Wi-Fi Direct Name is the model nameand the maximum length is 22 characters.• Password setting is the numeric string, and the size is 8 ~ 64 characters.
