Media and tray422. Menu Overview and Basic Setup3 Squeeze the multi-purpose (or manual feeder) tray paper width guidesand adjust them to the width of the paper. Do not force them too much,or the paper will bent resulting in a paper jam or skew.• When printing the special media, you must follow the loading guideline(See "Printing on special media" on page 42).• When papers overlap when printing using multi-purpose (or manualfeeder) tray, open tray 1 and remove overlapping papers then tryprinting again.4 When you print a document, set the paper type and size for the multi-purpose (or manual feeder) tray.For information about setting the paper type and size on the controlpanel (see "Setting the paper size and type" on page 47).4Printing on special mediaThe table below shows the special media usable in tray.The paper setting in the machine and driver should match to print without apaper mismatch error.To change the paper setting set in the machine, from the Samsung Easy PrinterManager select (Switch to advanced mode)> Device Settings.Or if your machine supports a display screen, you can set it using the(Menu) button on the control panel.Then, set the paper type from the Printing preferences window > Paper tab >Paper Type (see "Opening printing preferences" on page 53).For example, if you want to print on labels, select Labels for Paper Type.• When using special media, we recommend you feed one sheet at a time(see "Print media specifications" on page 129).• Illustrations on this user’s guide may differ from your machinedepending on its options or models. Check your machine type (see"Front view" on page 20).To see for paper weights for each sheet, refer to "Print media specifications" onpage 129.
