Using USB memory device692. Menu Overview and Basic SetupAfter scanning is complete, you can remove the USB memory device from themachine.Customizing Scan to USBYou can specify image size, file format, or color mode for each scanning to USBjob.1 Select (scan) > (Menu) > Scan Feature > USB Feature on thecontrol panel.2 Select the setting option you want appears.Some features may not be available depending on model.• Original Size: Sets the image size.• Original Type: Sets the original document’s.• Resolution: Sets the image resolution.• Color Mode: Sets the color mode. If you select Mono in this option,you cannot select JPEG in File Format.• File Format: Sets the file format in which the image is to be saved.When you select TIFF or PDF, you can select to scan multiple pages.If you select JPEG in this option, you cannot select Mono in ColorMode.• Duplex: Sets the duplex mode.• Darkness: Sets the brightness level to scan an original.3 Select the desired status you want and press OK.4 Repeat steps 2 and 3 to set other setting options.5 Press (Stop/Clear) button to return to ready mode.26Printing from a USB memory deviceYou can directly print files stored on a USB memory device.File is supported by Direct Print option.• PRN: Only files created by provided driver with your machine arecompatible.If you print PRN files created from other machine, the printout would bedifferent.• TIFF: TIFF 6.0 Baseline• JPEG: JPEG Baseline• PDF: PDF 1.7 or lower version.
