853. MaintenanceInstalling accessories8Precautions• Disconnect the power cordNever remove the control board cover while the power is turned on.To avoid the possibility of an electrical shock, always disconnect the powercord when installing or removing ANY internal or external accessories.• Discharge static electricityThe control board and internal accessories (network interface card ormemory module) are sensitive to static electricity. Before installing orremoving any internal accessories, discharge static electricity from yourbody by touching something metal, such as the metal back plate on anydevice plugged into a grounded power source. If you walk around beforefinishing the installation, repeat this procedure to discharge any staticelectricity again.When installing accessories, the battery inside the machine is a servicecomponent. Do not change it by yourself. There is a risk of an explosion ifbattery is replaced by an incorrect type. Dispose used batteries according tothe instructions.9Setting Device OptionsWhen you install the optional devices such as optional tray, memory, etc, thismachine automatically detects and sets the optional devices. If you cannot usethe optional devices you installed in this driver, you can set the optional devicesin Device Options.1 Click the Windows Start menu.• For Windows 8, from the Charms, select Search > Settings.2 For Windows XP/2003, select Printers and Faxes.• For Windows 2008/Vista, select Control Panel > Hardware andSound > Printers.• For Windows 7, select Control Panel > Hardware and Sound >Devices and Printers.• For Windows 8, search for Devices and Printers.• For Windows Server 2008 R2, select Control Panel > Hardware >Devices and Printers.3 Right-click your machine.4 For Windows XP/2003/2008/Vista, press Properties.For Windows 7, Windows 8, and Windows Server 2008 R2, from contextmenus, select the Printer properties.
