90PC SoftwareIf you set PC Software to On, you can simply use the PC software by connecting the USB cable between thecamcorder and your PC. You can download the stored video and photo images on the camcorder to yourPC’s hard disk. Editing video/photo fi les is also available using the PC software.1. Press the MENU button Control joystick (/) “Settings” Control joystick (//OK) “PC Software.”2. Select the desired submenu item with the Control joystick (/),and then press the OK button.3. Press the MENU button to exit the menu.Submenu Itemsitems contents on-screen display“Off” Disables the function. -“On” The built-in editing software launches when the camcorder isconnected to the PC. -The PC Software is compatible with the Windows OS only.TV DisplayYou can enable or disable the On Screen Display (OSD) that appears on the TV screen when connecting yourcamcorder to a TV.1. Press the MENU button Control joystick (/) “Settings” Control joystick (//OK) “TV Display.”2. Select the desired submenu item with the Control joystick (/),and then press the OK button.3. Press the MENU button to exit the menu.Submenu Itemsitems contents on-screen display“Off” The OSD (On Screen Display) menus are only shown on the LCDscreen. -“On” The OSD menus are shown on the LCD screen and the TVscreen as well. (Connecting to a TV page 93) -system settingSettingsPC SoftwareShutter SoundAuto Power OffExitSTBY 0:00:00 [475Min]SelectSCENE:::SettingsTV DisplayAuto Power OffPC SoftwareExitSTBY 0:00:00 [475Min]SelectSCENE:::
