18Battery pack insertion/ejectionIt is recommended you purchase one or more additional battery packs to allow continuous useof your camcorder.Inserting the battery pack1. Insert the battery pack into the batterypack slot until it softly clicks.• Make sure that the SAMSUNG logois facing front when the camcorder isplaced as shown in the fi gure.Ejecting the battery pack1. Gently push the Battery pack releaseswitch in the direction as shown in thediagram to eject the battery.2. Push down and lift the battery pack topull out in the direction as shown in thediagram.CONNECTING A POWER SOURCE• Be sure to charge the battery pack before you start using your camcorder.• Use the IA-BP210E battery pack only.• The battery pack may be charged a little at the time of purchase.• Use only Samsung-approved battery packs. Do not use batteries from other manufacturers.Otherwise, there is a danger of overheating, fi re or explosion.• Samsung is not responsible for problems occurring due to using unapproved batteries.• Remove the battery pack separately from the camcorder while not in use.• It is recommended to prepare an additional battery pack for prolonged outdoor use.• Additional battery packs can be purchased from samsungparts.com.preparationInsertEject
