Wireless network (WB150F/WB151F/WB152F only) 101Connecting to a WLAN and configuring network settingsUsing the login browserYou can enter your login information via the login browser whenconnecting to some APs, sharing sites, or cloud servers.Button Description[D/c/F/t] Move to an item or scroll the page.[o] Select an item.[m]Access the following options:• Previous Page: Move to the previous page.• Next Page: Move to the next page.• Reload: Reload the page.• Stop: Stop loading the page.• Exit: Close the login browser.[b] Close the login browser.• You cannot select some items depending on the page you connectedto. This does not indicate a malfunction.• The login browser may not close automatically after you log into somepages. If this occurs, close the login browser by pressing [b], andthen proceed with the desired operation.• It may take longer to load the login page due to the page size ornetwork speed. If this occurs, wait until the login information inputwindow appears.Setting network options1 In the AP Setting screen, move to an AP, and thenpress [t].2 Select each option, and then enter the requiredinformation.Option DescriptionAuthentication Select a network authentication type.Data Encryption Select an encryption type.Network Password Enter the network password.IP Setting Set the IP address manually.Manually setting the IP address1 In the AP Setting screen, move to an AP, and thenpress [t].2 Select IP Setting Manual.3 Select each option, and then enter the requiredinformation.Option DescriptionIP Enter the static IP address.Subnet Mask Enter the subnet mask.Gateway Enter the gateway.DNS Server Enter the DNS address.
