Playback/Editing 93Transferring files to your Windows computer5 Turn on the camera.• When the Intelli-studio installation pop-up appears on thecomputer screen, follow the on-screen instructions tocomplete the installation.• Once the Intelli-studio is installed on your computer, thecomputer recognizes the camera and launches theIntelli-studio automatically.If you set the USB option to Select Mode, select Computer in thepop-up window.6 Select a destination folder on your computer, and thenselect Yes.• New files stored on the camera will automatically transfer tothe selected folder.• If your camera has no new files, the pop-up window for savingnew files will not appear.For Windows Vista and Windows 7, select Run iLinker.exe from the AutoPlay window to start Intelli-studio. If Run iLinker.exe does not appear onthe computer, click Computer Intelli-studio, and then follow theon-screen instructions to complete the Intelli-studio installation.Transferring files with Intelli-studioYou can download Intelli-studio from the linked webpage andinstall it on your computer. When you connect the camera toa computer with Intelli-studio installed, the program will launchautomatically.The battery will charge while the camera is connected to a computer with theUSB cable.1 Rotate the mode dial to n.2 Select Connectivity PC Software On.3 Turn off the camera.4 Connect the camera to your computer with the USBcable.You must plug the small end of the USB cable into your camera. If thecable is reversed, it may damage your files. The manufacturer is notresponsible for any loss of data.
