Sanyo DSR-3000 Instruction Manual

Also see for DSR-3000: Instruction manual Service manual

Contents

Sanyo DSR-3000 Instruction Manual Manual pdf 16 page image

RECORDING IMAGES IN THEALARM RECORDING AREAAlarm recordingInsert the power cord into a wall outlet and turn on thepower.The POWER indicator illuminates, and after approximately 15 seconds, theEXIT/OSD indicator illuminates. The camera images appear on the monitor, andthe operating display appears in the top-left corner of the screen.Note: The operating display can be moved or switched off by pressing theEXIT/OSD button repeatedly.See page 11 for details of the operating display.1 Setting the timePress the MENU button to display the LANGUAGE/CLOCK SET menu, and setthe date and time. After the setting has been made, press the EXIT/OSD button,the date and time appear in the operating display. (See page 40.)2 Set alarm recording.• Press the MENU button to display the ALARM REC MODE SET menu fromthe MAIN MENU screen. Then change the ALARM RECORDING setting tothe desired alarm recording setting (MODE1, 2, 3 or 4) and change theALARM TRIGGER setting. (See page 52 ~ 54.)• Press the MENU button, to display the BUZZER SET menu from the MAINMENU 2 screen, and change the ALARM setting to “ON”. (See page 60.)• Press the EXIT/OSD button to return to the normal screen.Suspicious person detectionWhen an alarm occurs, “ALARM” appears in the operating display, the ALARMindicator flashes and alarm recording (a symbol) starts. Alarm images arerecorded in the alarm recording area. Furthermore, the number of alarms in theoperating display is increased by one each time an alarm occurs.Note: Normal recording and timer recording stop when an alarm occurs duringnormal recording or timer recording.Ending alarm recordingRecording ends after the end of the alarm duration period (default setting: 1 sec).The “a” and ALARM displays stop flashing and recording stops.Note: When the remaining area in the alarm recording area reaches 1%, theALARM FULL indicator on the front panel flashes. If recording is continuedunder these conditions, the recording area is filled and the recordingstops. In the RECORDING AREA SET settings, carry out the AREA FULLRESET operation for the alarm recording area.Overwriting will be canceled and recording will be possible from thebeginning again. (See page 44.)POWEREXIT/OSD1 Operating display01-01-0100:00:00 EN 0.10SECMENU2 MENU 1>1.LANGUAGE/CLOCK SET ->2.VIDEO INPUT SET ->3.RECORDING AREA SET ->4.RECORDING CONDITIONS SET ->ENGLISH SET>01-01-2001 MON 00:00:00S S REC MODE SET>PICTURE QUALITY : ENHANCEDFRAME/FIELD RECORDING : FIELDAUDIO RECORDING : OFFALARM RECORDING : MODE1REC CYCLE : 0.10SEC. DURATION: 1SECPRE-ALARM RECORDING : ¤¤¤REC CYCLE : ¤¤¤ SEC. DURATION: ¤¤¤=> (46400 ALARMS CAN BE RECORDED)ALARM TRIGGER : ALARMMOTION SENSOR ->ALARM3 10-05-01 ALARM 000118:10:25 EN 0.10SECThe number ofalarms is counted.4POWER FULL ALARM FULL LOCAlarm images arerecordedEnglish 15