Sanyo DSR-3000 Instruction Manual

Also see for DSR-3000: Instruction manual Service manual

Contents

Sanyo DSR-3000 Instruction Manual Manual pdf 25 page image

SEARCHING FOR RECORDED IMAGESAlarm searchAll alarm recording images in the alarm recording area can be searched for and played back. If pre-alarm images have is recorded, the imagesimmediately before the alarms can also be played back.Press the SEARCH FRAME/FIELD button during recordingor when the digital video recorder is stopped.The SEARCH screen appears.Use the jog dial to select ALARM SEARCH and then turn theshuttle dial clockwise.The ALARM SEARCH screen appears.1 NO: Alarm number appears.2 DATE/TIME: The date and time that the alarm was received and the imageswere recorded appears.3 TOTAL ALARM: The total number of alarm images recorded appears.Use the jog dial to move the cursor in order to select theimages to be played back.The selected alarm image appears in the preview screen.Note:• Up to eight items of alarm information can be displayed on the ALARMSEARCH screen. When the jog dial is turned, the previous or next alarminformation screen appears.• To end this search mode, press the SEARCH FRAME/FIELD button.Turn the shuttle dial clockwise.The preview image appears in a single-screen display and playback starts.Note:• You can also use the shuttle dial or jog dial to carry out operations such aspausing and fast-forward playback.• Alarm search starts playback from the image that was recorded at the instantthe alarm occurred, so if you are viewing pre-alarm images, use the shuttleoperations to carry out rewind playback.Alarm search 2Press an ALARM skip button during playback.• If you press the û button, playback skips to the previous alarm image.• If you press the ù button, playback skips to the next alarm image.Note: When playing back using alarm search, the playback will pause at thestart and at the end of each alarm recording. Use the ALARM skip buttonsto play back previous and subsequent alarm recordings.SEARCHFRAME/FIELD1 ALARM SEARCH ->ALARM THUMBNAIL SEARCH ->TIME/DATE SEARCH ->ARCHIVE AREA SEARCH ->MOTION DETECTION SEARCH ->MOVE:JOG SELECT:SHUTTLE2 SEARCH>NO DATE TIME TOTAL ALARMS008 12-13 11:13 0010007 12-13 11:15006 12-13 15:19005 12-15 10:13004 12-16 16:13003 12-16 11:13002 12-19 14:23001 12-20 05:37MOVE:JOG SELECT:SHUTTLE1 2 33 SEARCH>NO DATE TIME TOTAL ALARM008 12-13 11:13 0234007 12-13 11:15006 12-13 15:19005 12-15 10:13004 12-16 16:13003 12-16 11:13002 12-19 14:23001 12-20 05:37MOVE:JOG SELECT:SHUTTLE4 11-18-01 ALARM 000425:03:12 EN 0.10SECALARM1 11-18-01 ALARM 000425:03:12 EN 0.10SEC24 English