|
Recording settings57 How to setEnglish1 Display the screen asexplained in "Displaying the recording settings screen",and then turn the S-dial clockwise. (P39)The "OFF" field of ALARM RECORDING starts blinking.2 Set the pre-alarm recording.1 Turn the J-dial to select "ENABLED" for ALARMRECORDING, and then turn the S-dial clockwise.The "***" field of the PRE-ALARM RECORDINGswitches to "OFF".2 Turn the J-dial to select "PRE-ALARM RECORDING",and then turn the S-dial clockwise.The "OFF" indicator of PRE-ALARM RECORDING startsblinking.3 Turn the J-dial, turn "ON" the PRE-ALARMRECORDING, and then turn the S-dial clockwise.The "****" displayed at the REC RATE and DURATIONfields changes to numbers, and a messageis displayed, with "NO" blinking.4 Turn the J-dial, select "YES", and turn the S-dialclockwise.The cursor moves to "REC RATE".5 Turn the S-dial clockwise.6 Turn the J-dial to select the REC RATE (example:7.5), and then turn the S-dial clockwise.Repeat the same procedure to set the DURATION(example: 20).After the arrow symbol (=>) the number of alarms thatcan be recorded is displayed.3 Press the EXIT/OSD button."PRE" appears in the operation display area.When an alarm is detected, the "ALARM" field startsblinking.1 Turn the J-dial to the select ALARM TRIGGERselections and turn the S-dial clockwise.The "ALARM" starts blinking.Selections:ALARM/SENSOR/ALARM AND SENSOR/ALARM ORSENSOR2 Turn the J-dial, select ALARM TRIGGER. Then turn theS-dial clockwise, and select "ALARM".The cursor moves back to the ALARM RECORDING field.3 Press the EXIT/OSD button.b Input signals used as external alarmsThe signals that can be used as alarms are of two types: signalsdetected at the ALARM IN terminal switches, and alarm signalssuperimposed on the coaxial signals coming from cameras.G-2 Pre-alarm recording settingsMENU(J) (S) REC MODE SET>ALARM RECORDING : OFFPICTURE QUALITY : ENHANCEDAUDIO RECORDING : OFFALARM INTERLEAVE : ONLYREC RATE: 15FPS, DURATION: 20SECPRE-ALARM RECORDING : OFFREC RATE: **** FPS, DURATION: ****=> (01731 ALARMS CAN BE RECORDED)ALARM TRIGGER : ALARMMOTION SENSOR ->7.ALARM REC MODE SET2.RECORD SETPRE-ALARM RECORDING : OFFREC RATE: A 15FPS, DURATION: 1MINREC RATE SETTING IN THE MENU WILL BEAUTOMATICALLY ADJUSTED.ARE YOU SURE ?NOG-3 Alarm trigger settingREC RATE: A 7.5FPS, DURATION: 20SEC=> (00694 ALARMS CAN BE RECORDED)0201-01-06 00:00:00 REC REPEAT EN A PRE 0000EXIT/OSD Alarm totalPRE indicatorALARM TRIGGER : ALARMEXIT/OSD
|
