81 How to setEnglishInitialization log1 DATE/TIMEDisplays the date and time of the initialization.Displays the eight most recent items in the initialization log.Information about earlier initializations is not available.2 AREADisplays the hard disk recording area that was initialized.Display:ALL AREAS, NORMAL REC, ARCHIVE, ALARM REC3 OperationsDisplays whether the area was INITIALIZED or subject toAREA RESET.Recording area modifications are displayed as "INITIALIZED".Use this procedure to view the hard disk initialization andarea reset log. The log displays the eight most recentlyperformed operations.1 Press the MENU button, turn the J-dial, select"6.INITIALIZATION LOG", and then turn the S-dialclockwise.The screen appears.2 Press the EXIT/OSD button to exit.A Initialization log menu description LOG>DATE TIME AREA----- --:-- ------ (------)----- --:-- ------ (------)----- --:-- ------ (------)----- --:-- ------ (------)----- --:-- ------ (------)----- --:-- ------ (------)----- --:-- ------ (------)----- --:-- ------ (------)1 2 3A-1 Viewing the logMENU(J) (S) MENU>1.INITIAL SET ->2.RECORD SET ->3.GENERAL SET ->4.SCREEN SET ->5.POWER LOSS/USED TIME ->6.INITIALIZATION LOG ->7.COPY MENU SETTINGS ->MOVE:JOG SELECT:SHUTTLE LOG>DATE TIME AREA10-26 18:25 ALL AREAS (INITIALIZED)10-26 23:18 ALL AREAS (INITIALIZED)10-26 23:18 ARCHIVE (AREA RESET)10-26 23:18 ALARM REC (AREA RESET)10-26 23:18 NORMAL REC (AREA RESET)10-26 23:16 ALL AREAS (INITIALIZED)10-26 23:15 ALL AREAS (INITIALIZED)----- --:-- ------ (------)EXIT/OSD
