Sanyo DSR-3716 Instruction Manual

Also see for DSR-3709: Instruction manual Instruction manual Quick operating guide

Contents

Sanyo DSR-3716 Instruction Manual Manual pdf 6 page image

Safety precautions5 ForewordEnglishFollow the points outlined below for proper useb Hard diskThis unit is loaded with a hard disk drive. Stored data on this unit may be damaged/lost through hard-disk breakdowns caused by shock/vibration.Follow the items outlined below when placing, transporting, and operating this unit.WarningG This unit is designed to be positioned horizontally.Do not position vertically.G Do not expose to shock or vibration and do not transportwhile power is turned on.Always turn the power off, even when moving in and out ofracks.G Do not remove the power cable while recording or playingback.G Do not move the unit for approximately 30 seconds afterturning the power off.The hard disk is rotating for a short duration after the power isturned off. The unit is further susceptible to damages throughshock and vibration in this state compared to when the power isturned on. Do not move it.G Do not expose to shock or vibration.Avoid placing this unit directly on the floor. Make sure that thefour stands attached to the base of this unit are used, whenplacing it on the floor.G Always use the original packaging (packaging provided atthe time of purchase), when delivering.Use the packaging materials provided during the originalpurchase when the unit or a single internal component is goingto be delivered. Deliver using a method that causes the leastamount of shock and/or damage to this unit.WarningG Inspecting for abnormalities in the hard disk drive and thecooling fanThis unit is designed to automatically check the drive andcooling fan when the power is turned on. Replacement partswill be necessary if abnormalities are detected.Images will have to be saved and initialization will have to takeplace if there is a fault with the drive. Consult the dealershipwhere this unit was purchased for details.G Wear in the hard disk drive and the cooling fanThe hard disk drive and cooling fan are consumable items.Replace the parts stated below when using the unit in a 25°Cenvironment. The replacement timings listed are approximateand do not guarantee the performance or life expectancy of thepart in question.• Hard disk: 2 years• Cooling fan: 3 years• Damper: 2 yearsConsult the dealership where the unit was purchased forreplacement drives.• The drive is vulnerable to static electricity shocks. Take theappropriate measures to prevent exposure to staticelectricity.• Unpackaged drives should be placed horizontally with theirbase facing upwards on top of a soft cloth. Exposing thedrive to shocks and vibration may cause breakdowns.• Do not expose the drive to shocks and vibrations whileremoving/tightening the screws during replacement. Firmlytighten the screws after replacement.Cooling fan