Sanyo DSR-3716 Instruction Manual

Also see for DSR-3709: Instruction manual Instruction manual Quick operating guide

Contents

Sanyo DSR-3716 Instruction Manual Manual pdf 69 page image

General settingsHow to set 68EnglishL1 DISK1Displays the total capacity of the internal hard disk. If the harddisk is replaced, the capacity may change.2 DISK2Displays the total capacity of the second hard disk, if it wasinstalled in the DVR.3 DISK INITIALIZEThis item is used to initialize the internal hard disk. Allrecordings are erased when the hard disk is initialized.The initialization is performed on DISK1 and DISK2simultaneously.4 MIRRORINGIf another hard disk is installed, and MIRRORING is turned"ON", then a PLAYBACK DRIVE can be selected, and thesame video will be recorded on both hard disks. If a writingerror occurs, one of DISK1 and DISK2 can be used to read therecordings.• Note that if MIRRORING is turned "ON", the recording ratewill be automatically limited (to half of the normal recordingrate).• If a playback problem occurs while MIRRORING is ON,change the hard disk used for playback by selecting DISK1or DISK2 at the "PLAYBACK DRIVE" setting.5 PLAYBACK DRIVEUse this setting together with MIRRORING, to designate one ofthe two hard disks for video playback.Selections: DISK1/DISK21 Display the screen using "Displaying thegeneral settings screen". (P62)The cursor moves to "DISK INITIALIZE".2 Turn the S-dial clockwise.The screen is displayed, and "NO" is blinking.3 Turn the J-dial, select "YES", and turn the S-dialclockwise.The "HDD INITIALIZING !" message appears, and theinitialization starts.When the initialization is complete, the screenreturns.4 Press the EXIT/OSD button.D Hard disk settings menu description SET>DISK1 : 82GBDISK2 : ---GBDISK INITIALIZE ->CAUTION : ALL RECORDING WILL BE ERASED!MIRRORING : OFFPLAYBACK DRIVE : ***CAUTION : RECORDING SPEED WILL BELIMITED BY MIRRORING!12345D-1 Hard disk initialization☞ Hard disk expansionBefore installing another hard disk, consult with the store where youpurchased your system.We recommend using the expansion hard disk provided by SANYO.Operation is not guaranteed if a hard disk other than SANYO'srecommended type is used for capacity expansion.• The hard disks must be initialized, upon installing an expansiondisk. The initialization is performed on the two hard diskssimultaneously. Save your recordings on a CompactFlash card orother media before the initialization.MENU(J) (S) SET>DISK1 : 82GBDISK2 : ---GBDISK INITIALIZE ->CAUTION : ALL RECORDING WILL BE ERASED!4.HDD SET3.GENERAL SET