|
English 1076 POWER LOSS/USED TIMEUse the following procedure to check the date and time ofpower losses, the amount of hard disk operation time, andthe amount of power-on time.1 Press the [MENU] button and turn theselect “5. POWER LOSS/USED TIME”,and then turn the shuttle dial clockwise.The screen is displayed.Check the date and time of power losses and the amountof hard disk operation time.(1) LOSS/RECOVERDisplay information in sequence for the four mostrecent power losses (i.e., the date and time of lossand recovery).The number on the left is the number of power losses(Example: #011). For all numbers above 999, thenumber “999” is displayed.(2) DISK1 USEDisplays the total amount of running time for disk 1.(3) DISK2 USEDisplays the total amount of running time for disk 2.When only one hard disk is installed, “------” isdisplayed.(4) POWERDisplays the amount of power-on time for the digitalvideo recorder.2 Press the [EXIT/OSD] button.The display returns to the normal screen.1.INITIAL SET ->2.RECORD SET ->3.GENERAL SET ->4.SCREEN SET ->5.POWER LOSS/USED TIME ->6.INITIALIZATION LOG ->7.COPY MENU SETTINGS ->MOVE:JOG SELECT:SHUTTLEMain MenuCARDCARDMENURESETEJECTJog dial[MENU] button Shuttle dial[EXIT/OSD] buttonPOWER LOSS RECOVER#011 01-14 19:15 01-15 09:5501-13 21:13 01-14 09:2101-03 18:48 01-05 08:5601-01 09:49 01-03 10:32USED TIME DISK1 USE : 00096HDISK2 USE : -----HPOWER : 00096HF/W: M 0.30-00 / S 0.20-04 / C 0.09-00MENU(3)(1)(2)(4)EXIT/OSDe00_l8hbg_us_7.book Page 107 Thursday, November 25, 2004 1:44 PM
|
