Sanyo DSR-3716 Instruction Manual

Also see for DSR-3709: Instruction manual Instruction manual Quick operating guide

Contents

Sanyo DSR-3716 Instruction Manual Manual pdf 114 page image

English 1132 SPECIFICATIONSNote that product appearance and specifications are subject to change without prior notice.SpecificationsProduct name Digital video recorder with multiplexer functionProduct number DSR-3716 (16 channel), DSR-3709 (9 channel)Hard disk capacity Capability for mounting 80, 160, 250, or 300 GB hard disks (sold separately)Television system NTSC signal standardCompression Image: M-JPEG, Audio: WAVEPicture resolution 720 x 240 (fields)Recording type Field recordingPicture quality 5 levels [Basic, Normal, Enhanced, Fine, Super Fine]Recording rate 27 levels (60 to 0.033 FPS)Recording areas Normal recording area, Alarm recording area, Archive areaMagnification x2 digital zoom using the [ZOOM] buttonSearch modes Time/date search, Alarm search, Alarm thumbnail search, Archive area search, Motion detection searchDate/clock settings Month, Day, Year (last two digits), Hours, Minutes, SecondsDate and time positions 2 position; upper and lower (display may also be turned off)Camera title display Each channel; up to 10 alphanumeric characters and symbols (display may also be turned off)Memory backup Approximately 30 days (for 48 hours of electrification)Video input terminal VBS/VS 1.0 V (p-p), 75 Ω, BNC (DSR-3716: x16, DSR-3709: x9)Video output terminal Through output of each video input, BNC (DSR-3716: x16, DSR-3709: x9)Main monitor output terminal VBS 1.0 V (p-p), 75 Ω, BNC (x1)Monitor 2 output terminal VBS/VS 1.0 V (p-p), 75 Ω, BNC (x1)Audio input terminal -8 dBs, 27 kΩ, unbalanced RCA (x1)Audio output terminal -8 dBs, 600 Ω, unbalanced RCA (x1)Microphone input terminal -60 dBs, 10 kΩ, unbalanced 3.5 mm monaural pin jack (x1)Front AVoutputVideo output terminal 1.0 Vp-p, 75 Ω, unbalanced RCA x 1Audio output terminal -8 dBs, 600 Ω, unbalanced RCA x 1CompactFlash card slot CompactFlash Type 2 (front panel) (x1)TerminalsLAN terminal 10BASE-T/100BASE-TX, RJ-45 (x1)Compatible protocol: UDP, TCP/IP, HTTP serverRS-485 terminal RJ-11 (x2) (with a termination switch)USB terminal USB 1.1 series A terminal (x2) (front x1, rear x1)Alarm input terminals No-volt contacts (with a pulse width of 100 ms or more) (DSR-3716: x16, DSR-3709: x9)Sensor alarm output terminals Open collector, Low level active (Max. 25 mA) (DSR-3716: x16, DSR-3709: x9)Remote control input terminal Two-wire voltage control (x2)Clock adjust input terminal No-volt contacts (with a pulse width of 100 ms or more) (x1)Clock adjust output terminal Normal 5 V DC, Low level active (x1)Alarm output terminal Active Low, Open collector Max. 500 mA (x1)Alarm reset input terminal No-volt contacts (with a pulse width of 100 ms or more) (x1)Warning output terminal Normal 5 V DC, Low level active (x1)Normal recording area diskfull warning output terminal Normal 5 V DC, Low level active (x1)Alarm recording area disk fullwarning output terminal Normal 5 V DC, Low level active (x1)Series connection input Normal 5 V DC, Low level active (x1)Series connection output Normal 5 V DC, Low level active (x1)External timer input terminal No-volt contacts (with a pulse width of 1 second or more) (x1)Non rec output terminal Normal 5 V DC, Low level active (x1)Power supply voltage 120 to 240 V AC, 50/60 HzCurrent consumption 600 mAAllowable operating temperature 5 °C to 40 °CAllowable operating humidity 10 % to 80 %Dimensions 420 (W) x 86 (H) x 365 (D) mm (Not including protruding areas or rubber pads)Weight 6.3 kg with a HDD, 6.9 kg with 2 HDDsAccessory Power cord (x1), Core clamp (x2), Power cord tie (x1)e00_l8hbg_us_7.book Page 113 Thursday, November 25, 2004 1:44 PM