MENU CONFIGURATION AND OPERATIONS1English 49The following table indicates the sub-menus or setting screens displayed by selecting items from the .The [MENU] button can be used in any sub-menu to scroll through each of the sub-menus in sequence.1.INITIAL SET ->2.RECORD SET ->3.GENERAL SET ->4.SCREEN SET ->5.POWER LOSS/USED TIME ->6.INITIALIZATION LOG ->7.COPY MENU SETTINGS ->MOVE:JOG SELECT:SHUTTLE1.NORMAL REC EASY SET ->2.RECORDING AREA SET ->3.RECORDING CONDITIONS SET ->4.NORMAL REC MODE SET ->5.PROGRAM REC SET ->6.TIMER SET ->7.ALARM REC MODE SET ->8.ALARM OPERATION SET ->MOVE:JOG SELECT:SHUTTLEMain menu Sub menuTurn the jog dial to select the item tobe set, and then turn the shuttle dialclockwise.Sub-menu configurationSub menu Setting item Settings or display content1This sub-menu is used to makeinitial settings.(1) LANGUAGE/CLOCK SET(JP.51)Sets the language displayed on the monitor. Set the date and timedisplayed on the normal screen and daylight saving.Aligns the time of all digital video recorders in situations wheremultiple recorders are connected.(2) CAMERA DETECT (JP.54) Automatically detects cameras that have been connected.(3) TITLE SET (JP.55) Sets a unique title for each camera so that these can be displayedon-screen.(4) HOLIDAY SET (JP.56) Sets specific dates as holidays to have the operation for Sundayused on those days also.(5) TIME PERIOD SET(JP.57)Sets a time period for automatic camera selection and the switchingof masking and motion-sensor operations.2This sub-menu is used to setrecording and alarms.(1) NORMAL REC EASYSET (JP.60) Makes basic settings based on a number of days or recording rate.(2) RECORDING AREA SET(JP.64)Displays the total capacity of the hard disk.Sets the normal recording area, the alarm recording area, the archive area.(3) RECORDINGCONDITIONS SET(JP.67)Sets whether overwriting is to be performed (by deleting old video) orrecording is to be stopped when any of the hard disk’s recordingareas become full. Also sets series recording and auto delete.(4) NORMAL REC MODESET (JP.71)Sets the recording quality, audio recording, the recording rate, andprogram recording.(5) PROGRAM REC SET(JP.73) Sets program recording for cameras and the program recording rate.(6) TIMER SET (JP.74) Makes timer settings so that operations can be started at a specifiedtime or on a specified day.(7) ALARM REC MODE SET(JP.77) Sets alarm recording, pre-alarm recording, and motion sensors.(8) ALARM OPERATIONSET (JP.84) Makes settings for alarms and displays used to detect intruders.3This sub-menu is used to makesettings for monitor display andthe system.(1) DISPLAY SET (JP.86)Sets display switching for the operation display area.Enables “VIDEO LOSS” to be displayed when the camera video isinterrupted.(2) BUZZER SET (JP.88) Turns the buzzer on or off.(3) SECURITY LOCK SET(JP.89)Sets passwords that restrict use of the digital video recorder to administratorsand designated users, thus preventing unauthorized operation.(4) HDD SET (JP.92) Allows confirmation of hard disk capacity and performs initialization.Makes the required settings for mirroring.(5) NETWORK SET (JP.93) Makes settings to allow remote setting of the digital video recorder’s menuitems and remote monitoring of video from a PC via a network (LAN).(6) RS-485 SET (JP.96) Makes settings when using RS-485.(7) CAMERA CONTROLSET (JP.97)Makes settings to allow control of the cameras from the digital videorecorder.1.LAUNGUAGE/CLOCK SET ->2.CAMERA DETECT ->3.TITLE SET ->4.HOLIDAY SET ->5.TIME PERIOD SET ->MOVE:JOG SELECT:SHUTTLE1.NORMAL REC EASY SET ->2.RECORDING AREA SET ->3.RECORDING CONDITIONS SET ->4.NORMAL REC MODE SET ->5.PROGRAM REC SET ->6.TIMER SET ->7.ALARM REC MODE SET ->8.ALARM OPERATION SET ->MOVE:JOG SELECT:SHUTTLE1.DISPLAY SET ->2.BUZZER SET ->3.SECURITY LOCK SET ->4.HDD SET ->5.NETWORK SET ->6.RS-485 SET ->7.CAMERA CONTROL SET ->MOVE:JOG SELECT:SHUTTLEe00_l8hbg_us_7.book Page 49 Thursday, November 25, 2004 1:44 PM
