GENERAL SET4English 975 Turn the shuttle dial clockwise and turnthe jog dial to set “ALARM INFO”, andthen turn the shuttle dial clockwise.The cursor moves to “ADDRESS”.[Settings] ( indicates default setting)6 Turn the shuttle dial clockwise and set“ADDRESS” with the jog dial or numerickeys and then turn the shuttle dialclockwise.[Setting conditions]Addresses between “0” and “127” can be set for this unit.7 Press the [EXIT/OSD] button.The setting procedure is ended and the display returns tothe normal screen.The following procedure explains settings and operationsof remote controllable cameras connected to the VIDEO INterminals via coaxial cable.1 Press the [MENU] button, turn the jogdial to select “3. GENERAL SET” andthen turn the shuttle dial clockwise.The screen is displayed.2 Turn the jog dial to select “7. CAMERACONTROL SET” and then turn theshuttle dial clockwise.The screen is displayed.3 Turn the jog dial to select a channelconnected to a camera and then turnthe shuttle dial clockwise.The “PROTOCOL” field flashes.Setting DescriptionON Alarm information is transmitted.OFF Alarm information is not transmitted.DATA SPEED : 19200STATUS INFO : ONALARM INFO : ONADDRESS : 000DATA SPEED : 19200STATUS INFO : ONALARM INFO : ONADDRESS : 001EXIT/OSDSetting camera controlMENUCH PROTOCOL ADD. | CH PROTOCOL ADD.01 OFF --- | 09 OFF ---02 OFF --- | 10 OFF ---03 OFF --- | 11 OFF ---04 OFF --- | 12 OFF ---05 OFF --- | 13 OFF ---06 OFF --- | 14 OFF ---07 OFF --- | 15 OFF ---08 OFF --- | 16 OFF ---CH PROTOCOL ADD. | CH PROTOCOL ADD.01 OFF --- | 09 OFF ---02 OFF --- | 10 OFF ---03 OFF --- | 11 OFF ---04 OFF --- | 12 OFF ---05 OFF --- | 13 OFF ---06 OFF --- | 14 OFF ---07 OFF --- | 15 OFF ---08 OFF --- | 16 OFF ---e00_l8hbg_us_7.book Page 97 Thursday, November 25, 2004 1:44 PM
