Sanyo LCD-32K40 Owner's Manual

Also see for LCD-32K40: Service manual

Sanyo LCD-32K40 Owner's Manual Manual pdf 24 page image

24Press PIP button to display sub picture.1During PIP mode, pressing the P-SWAP button will switch main and sub picture.The sound on the main picture and the sub picture also changes at the same time.Each time PIP button is pressed, the location of sub picture is changed as follows.23PIP/POP OPERATIONConfirm the each screen size (TV, AV1, AV2-S, DVD, HDMI or PC) is “FULL” mode. PIP can beset only in “Full” mode. For example, set the screen size of HDMI and TV to “Full” moderespectively when you combine picture of HDMI with the picture of TV.Press P-INPUT button in PIP mode can switch input source in Sub picture. (Refer to this page"PIP Combination".)4Main PictureSub PictureUsing PIP/POP function, you can enjoy a TV program and animage such as HDMI input from a side terminal at the sametime.Only the sound on the main picture is heard from the TVspeaker or the headphone jack. The sound on the sub-picturecannot be heard.Note:● PIP/POP function only work in "FULL" mode.● PIP/POP will prohibited during 1080p mode, warning message "OUT OF RANGE" will be displayed.● When PIP/POP is ON, MENU has restriction as follows:- SEARCH can not be selected in CHANNEL menu.- PICTURE menu for Sub picture is not available.- PC screen menu for Sub picture can not be selected when Sub picture has PC source.PIP ON/OFFSwitching of the Main picture and Sub pictureDuring PIP mode, pressing the P-SWAP button will switch main and sub picture.The sound on the main picture and the sub picture also changes at the same time.(PIP OFF)Note:PIP mode can be cancelled by BACK button except that On-Screen menu is being operated.Press BACK or POWER ON/OFF buttons to exit PIP mode.5BASIC OPERATIONREMOTE CONTROLPIP button P-INPUT buttonP-SWAPbuttonPOP buttonLCD-K40.indd 24 1/21/2010 10:47:20 AM