Sanyo LCD-32K40 Owner's Manual

Also see for LCD-32K40: Service manual

Sanyo LCD-32K40 Owner's Manual Manual pdf 38 page image

38SHOP MODEHOME MODEPress POINT ◄► buttons to enter into SHOP MODE menu.Press POINT ◄► buttons to choose HOME MODE or SHOPMODE. Press OK button to enter into HOME MODE or SHOPMODE.In this mode, the adjustments you have set of "Picture mode" and"ECO" will be stored as the last memory automatically. ( The initialsettings are "DYNAMIC" and "OFF".)OK : ENTER: SELECTPLEASE SELECT AND PRESS OK BUTTONHOME MODE SHOP MODEIn this mode, 30 minutes later after you made some adjustmentsof "Picture mode" and "ECO" and no other operation on the LCDTV, the initial setting will be recalled. ( The initial settings are"DYNAMIC" and "OFF".) The message of "INITIAL SETTINGRECALLED FOR DEMO" will appear on the screen for 3 seconds.Note:● Shop mode setting will be continued even after power off /on by Remotecontrol, LCD TV or AC power plug.● At the first power on and just after plug and play channel set-up, SHOPMODE menu will appear. Press POINT ◄► buttons to select and pressOK button for SHOP MODE or HOME MODE. Then the pop up menudisappears.INITIAL SETTING RECALLED FOR DEMOSHOP MODEMENU OPERATION (TV/AV/HDMI mode)HDMI LINKXACTI LINK: Press POINT ◄► buttons to open link connectionfor Xacti.XACTI POWER ON: Press POINT ◄► buttons to select "ON",The TV will turn on, but the Xacti will keepthe same status.(Note: TV will turn on automatically whenthe Xacti is turned on.)XACTI POWER OFF: Press POINT ◄► buttons to select "ON",The Xacti will turn off, but the TV will keepthe same status.(Note: Xacti will turn off automatically whenthe TV is turned off.)Note:● When "XACTI LINK" set to "OFF", "XACTI POWER ON" and"XACTI POWER OFF" is in gray and cannot select.● "HDMI LINK" doesn't work expect for Xacti connection.● "HDMI LINK" doesn't work if no HDMI input signal.(refer to "Duration" on MENU SETUP menu) to exit menu operation.SETUPCHILD LOCK ONECO SENSORDYNAMIC AI ONACTIVE CONTRAST ONGAME MODE ONGAME INPUT SELECT HDMI1HDMI LINKPC ADJUSTSHOP MODESELECT ADJUST BACK EXIT: : : :SETUPXACTI LINK ONXACTI POWER ON OFFXACTI POWER OFF ONHDMI LINKSELECT ADJUST BACK EXIT: : : :SETUPCHILD LOCK ONECO SENSORDYNAMIC AI ONACTIVE CONTRAST ONGAME MODE OFFGAME INPUT SELECT HDMI1HDMI LINKPC ADJUSTSHOP MODESELECT ADJUST BACK EXIT: : : :12Press POINT ▲▼ buttons to select SHOP MODE.3LCD-K40.indd 38 1/21/2010 10:47:29 AM