Sanyo LCD-32K40 Owner's Manual

Also see for LCD-32K40: Service manual

Sanyo LCD-32K40 Owner's Manual Manual pdf 41 page image

41PC ADJUSTThis function is used to adjust the position of image displayed onscreen. It can be selected when the LCD TV could be receivedPC signal and in PC mode. (Refer to "SIGNAL MODE COLUMN"on page 47.)Press POINT ◄► buttons to enter PC SCREEN menu. It canbe select "AUTO ADJUST", "H-POSITION", "V-POSITION","PHASE", "CLOCK" or "AUTO SHUT DOWN" to adjust.Press POINT ◄► buttons, and the TV automatically detectsincoming signal, and adjust itself to optimize its performance.If the image is not displayed properly, a manual adjustment isrequired (Refer to following adjustments).Eliminate disorder from the image. Press POINT ◄► buttons toadjust PHASE. (0~100)AUTO ADJUSTPHASEPress POINT ◄► buttons to set AUTO SHUT DOWN ON or OFF.When PC is switched Off, ''NO SIGNAL'' appears for 30 seconds,TV will be automatically switched to Backlight off mode.During Backlight Off Mode within 10 minutes, TV will be switchedto On Mode if PC is switched On.After Backlight Mode continues for 10 minutes, it will be switchedto Standby Mode. During Standby mode, TV will not be switchedto On mode even if PC is switched On.To switch on TV, press Power button on Remote Control or TV.AUTO SHUT DOWNNote:This function is for PC mode (full screen) only. It is not applicablefor PIP/POP dual pictures.MENU OPERATION (PC mode)SETUP■ Press BACK button to return to the previous menu.■ Press MENU button or wait for 5~60 seconds (refer to"DURATION" on page 36) to exit menu operation.SETUP MENU12Press MENU button and the main menu will appear.Press POINT ◄► buttons to select SETUP.Press POINT ▼ buttons to enter into SETUP menu.Press POINT ▲▼ buttons to select the item desired.3 Press POINT ◄► buttons to enter the item selected.4SETUPCHILD LOCK ONECO SENSORDYNAMIC AI ONACTIVE CONTRAST ONGAME MODE OFFGAME INPUT SEL HDMI1HDMI LINKPC ADJUSTSHOP MODESELECT ADJUST BACK EXIT: : : :SETUPCHILD LOCK ONECO SENSORDYNAMIC AI ONACTIVE CONTRAST ONGAME MODE OFFGAME INPUT SEL HDMI1HDMI LINKPC ADJUSTSHOP MODESELECT ADJUST BACK EXIT: : : :Note:For the details, please refer to "SETUP" on pages 37-38.SETUPAUTO ADJUSTAUTO SHUT DOWN ONPC ADJUSTV - POSITIONCLOCKPHASEH - POSITIONSELECT ADJUST BACK EXIT: : : :The horizontal picture position will be moved to the left side bypressing POINT ◄ button. And it will be moved to the right side bypressing POINT ► button. (0~100)The vertical picture position will be moved down side by pressingPOINT ◄ button. And it will be moved up side by pressing POINT► button. (0~100)H-POSITIONV-POSITIONEliminate flicker from the image. Press POINT ◄► buttons toadjust CLOCK. (0~100)CLOCK AUTO ADJUSTLCD-K40.indd 41 1/21/2010 10:47:30 AM