Sanyo LCD-32K40 Owner's Manual
Also see for LCD-32K40: Service manual
                                                    | |
Contents
| 
9CONNECTING LCD TVINSTALLING STANDBe careful of the panel. Suggest to put down thepanel side on the cushion or other soft materialbefore installing the stand.To align the corresponding pilot holes and fix thestand by screws.Screws B for LCD-32K40/A: 4 pcsScrews A for LCD-42K40/A-HD: 2 pcsScrews B for LCD-42K40/A-HD: 4 pcsPlease according to the following procedure to installstand.21Installing of stand is completed.3Note:Screws A are just for LCD-42K40/A-HD.ABBThis LCD TV uses nominal input voltages of 110-240VAC. This LCD TV automatically selects the correctinput voltage. It is designed to work with single-phase power systems. To reduce risk of electricalshock, do not plug into any other type of powersystem. Consult your authorized dealer or servicestation if you are not sure of the type of power beingsupplied.Connect the LCD TV with all peripheral equipmentbefore turning the LCD TV on.CAUTIONFor safety, unplug AC power cord when the LCDTV is not in use.CONNECTING AC POWER CORDTo the AC Outlet (110 - 240V AC). Pulls theAC power cord out from the LCD TV. TheAC outlet must be near this equipment andmust be easily accessible.AC POWER CORDLCD-K40.indd 9 1/21/2010 10:47:07 AM |
Related manuals for Sanyo LCD-32K40
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine