Sanyo LCD-32K40 Owner's Manual

Also see for LCD-32K40: Service manual

Sanyo LCD-32K40 Owner's Manual Manual pdf 32 page image

32The setting for sound system is only active in TV mode.Usually, the sound system is set to the position of "B/G". In caseof abnormal sound, repeatedly press POINT ◄► buttons to select"I", "D/K", "M" or "B/G" until the best sound effect is reached.This feature is used to remove unwanted channels from thechannel scanning memory.You can skip the unused or undesired channels when you areselecting a channel using CHANNEL UP/DOWN (▲▼) buttons.This function is only active in TV mode.To swap the channels between two stored programme positions.Press MENU button to display the main menu.1SOUND SYSTEMCOLOUR SYSTEMThe setting for colour system is only active in TV or AV mode.Usually, the colour system is set to the position of "AUTO". In caseof abnormal colour, repeatedly press POINT ◄► buttons to select"AUTO", "PAL", "SECAM", "NTSC" or "NTSC4.43" until the bestcolour effect is reached.SKIPCHANNEL SWAPEnter into "CHANNEL" menu, press POINT ▲▼ buttons toselect CHANNEL SWAP.2Press POINT ◄► buttons to enter into the Channel Swapmenu. Press POINT ▲▼ buttons to select the CURRENTCHANNEL or TARGET CHANNEL, then press POINT ◄►buttons to set the swap channel. And then press POINT ▲▼buttons to select SWAPPING item, then press POINT ◄►buttons to select "OK".3■ Press BACK button to return to the previous menu.■ Press MENU button or wait for 5~60 seconds (refer to"DURATION" on page 36) to exit menu operation.Manual search a channel if it cannot be automatically tuned, suchas when the signal is poor.Press and hold POINT ◄ or POINT ► button to search forrequired TV station. Press OK button to save desirable station.4Select channel “15”.1Press POINT ▲▼ buttons to select "SEARCH". Press POINT◄► buttons to start the channel searching.3Enter into CHANNEL menu, press POINT ▲▼ buttons toselect "MANUAL SEARCH". Press POINT ◄► buttons toenter into the MANUAL SEARCH menu.2MANUAL SEARCH MENUMANUAL SEARCH■ Press BACK button to return to the previous menu.■ Press MENU button to exit menu operation.MENU OPERATION (TV/AV/HDMI mode)MANUAL SEARCH55.25 MHZCHANNEL 15SEARCHSELECT ADJUST BACK: : :STORE:OKCHANNELSEMI-AUTO SEARCHMANUAL SEARCHCOLOUR SYSTEMSOUND SYSTEMSKIPCHANNEL SWAPAUTOB/GOFFAUTO SEARCHSELECT ADJUST BACK EXIT: : : :CHANNELCURRENT CHANNELTARGET CHANNELSWAPPING OKCHANNEL SWAP1216SELECT ADJUST BACK EXIT: : : :CHANNELCURRENT CHANNELTARGET CHANNELSWAPPINGCHANNEL SWAP1216SELECT ADJUST BACK EXIT: : : :MANUAL SEARCH55.25 MHZCHANNEL 15SEARCHSELECT ADJUST BACK: : :STORE:OKLCD-K40.indd 32 1/21/2010 10:47:26 AM