Sanyo LCD-40XR10SAF Instruction Manual

Connections(Continued)9Connecting HeadphonesInsert the plug of the headphone into the TV’s Headphone jack.When using headphones, adjust the headphone volume so as to avoidexcessive levels, as hearing damage may result.HeadphonesTV SideConnecting an HDMI deviceTV REARHDMI cableHDMI deviceConnect the HDMI cable between the HDMI jack on the TV andHDMI output jack on the device.Note: If your device has an HDMI connection, we recommend youuse that to get the best quality possible.To play from the HDMI device:How to connect an HDMI device:1. Turn on your TV, then press INPUT button. TheInput menu opens.2. Press 5or6to select HDMI1(or HDMI2 if HDMI 2jack is used), then press ENTER to confirm.Note: You can also press HDMI button once or twicefor HDMI1/HDMI2.3. Turn on the HDMI device and set it to the correctmode. Refer to the instructions that came with theHDMI device.If the external device has DVI output only, use a DVI to HDMIadapter cable to connect to the HDMI terminal. Connect the audiocable to the PC IN AUDIO jack on the TV rear.Note:Connecting a USB deviceTV SideTo USB portInsert your USB device into the USB port.To play from the USB device:1. Turn on your TV, then press INPUT button. The Input menu opens.2. Press 5or6to select USB, then press ENTER to confirm.Note: You can also press USB button on the remote control for USB.Never remove the USB device or turn off the TV while using the USBdevice.To connect headphones: