Sanyo LCD-40XR10SAF Instruction Manual

TroubleshootingRemote ControlIf, after reading these operating instructions, you have additional questions related to the use of your television, pleasecall the services center in your local area.Before calling service, please check the symptoms and follow suggested solutions.Problem Possible SolutionsRemote control does not operate ! The batteries could be weak. Replace the batteries.! Check the orientation of the batteries.! Make sure the power cord is plugged in.Video and AudioProblem Possible SolutionsNo picture (screen not lit),No soundDark, poor or no picture(Screen lit), good soundNo color/dark picture/coloris not correctOnly snow and noise appearon the screenDotted lines or stripesDouble images! Make sure the power cord is plugged in.! Press POWER on the TV or on the remote control.! Try another channel; it could be station trouble.! Select a proper picture mode.! Adjust the brightness in the video setting.! Check the antenna/cable connections.! Adjust the color saturation in the video setting.! Check the antenna/cable connections.! Try another channel; it could be station trouble.! Adjust the antenna.! Move the TV away from noise sources such as cars, neon signs, or hair dryers.! Using a highly directional outdoor antenna or a cable may solve the problem.Good picture, no sound ! The sound may be muted. Press MUTE again to cancel.Audio noise ! Communication problems may occur if infrared communication equipment(e.g., infrared cordless headphones) is used near the TV. Move the infraredcommunication equipment away from the TV until the noise is eliminated.GeneralProblem Possible SolutionsOne or some channels can’t bedisplayed! These channels may be set skipped On. You may set it to Off or select themwith 0-9 number buttons.Some items can’t be accessed ! If a setting option appears in gray, this indicates that the settings option isunavailable in current input mode.TV cabinet creaks ! When the TV is in use, there is a natural rise in temperature, causing thecabinet to expand or contract and may be accompanied by a slight creakingnoise. This is not a malfunction.Control buttons do not operate ! Disconnect the power cord and wait for a few seconds. Then re-plug thepower cord and turn on the unit again.Note: If your problem is not solved, turn your unit off and then on again.Cautions: Never attempt to repair a defective TV yourself.24