Sanyo LCD-40XR10SAF Instruction Manual

Adjusting the sound To adjust the sound:1Press 6or 5to display AUDIO menu, press ENTER to access.2Press MENU. The on-screen menu opens.! Sound Mode — Selects the sound mode. You can select:. Normal (for normal programs) . Music (for musical programs). Movie (for movies) . News (for news programs). User (for user setting sound mode).Note: You can also press SOUND on the remote control toselect the sound mode.! Equalizer — Adjusts the equalizer setting.! Balance — Adjusts the balance between the left and right audiochannels.! Surround — Turns the Surround sound effect on or off.! AVC — (Auto volume control) Turns AVC function on toequalize the overall volume levels for all channels.4AUDIOEqualizerSurroundBalanceAVCSound Mode UserOFFOFF50Move OKPress 6or 5to highlight an option, press ENTER to access theoption. Then use 3465ENTER to operate. You can select:3To close the menu, press EXIT button.NormalMusicMovieNews0db+6db-6db0 0 0 00 01k 2k 3k 8k300 15k hzAUDIOMove Adjust ReturnReturnUserEqualizer Setting Sub-MenuAdjusting the Sound & Setting Stereo Mode17Using this function to select a stereo mode as a default mode when youswitch on your TV program.MTSAuto ScanChannel EditAIR/CABLE CABLEMONOCHANNELMove EnterSetting stereo modeTo set stereo mode:1 Press MENU. The on-screen menu opens.Press 6or 5to display CHANNEL menu, then press ENTER.2Press 6or 5to highlight MTS, then press ENTER.3Press 6or 5to select a proper stereo mode, then press ENTER.MONO: Select for mono reception. Use to reduce noise during weakstereo broadcasts.STEREO: Select for stereo reception when viewing a programbroadcast in stereo.SAP: Select to automatically switch the TV to second audio programswhen this signal is received.Note: You can also press AUTO/STEREO on the remote controlrepeatedly to select the stereo mode.4To exit, press EXIT button.5ReturnColor System AUTO