Sanyo PDG-DWL2500 Owner's Manual

Also see for PDG-DWL2500 - 2500 Lumens: Specifications Specifications Dimensional drawing Specifications Specifications

Contents

20The preparation display will disappear after 30seconds.(See page 58 for Lamp control status.)Turning On the ProjectorConnect the projector’s AC power cord into an ACoutlet. The POWER indicator lights red.Press the ON/STAND-BY button on the remotecontrol or on the top control. The POWER indicatorlights green and the cooling fans start to operate. Thepreparation display appears on the screen and thecountdown starts.231 After the countdown, the input source that wasselected the last time and the lamp control status icon(See page 58) appear on the screen.Complete peripheral connections (with a computer,VCR, etc.) before turning on the projector.Selected Input Source and Lamp Control4Note:• When the Logo select function is set to Off, the logo willnot be shown on the screen. (p.53)• When Countdown off or Off is selected in the Displayfunction, the countdown will not be shown on the screen.(p.53)• During the countdown period, all operations are invalid.• When the Input search function is set to On 2, the inputsignal will be searched automatically. (p.51)• When Off is selected in the Display function, the Video/PC selection window and the input signal guidancewindow are not shown on the screen. (p.53)4Note:The Filter warning and Lamp replacementicons may appear on the screen dependingon the usage state of the projector.Basic OperationIf there is no signal input when start on the projector,or the current signal is missed while operating theprojector, the Video / PC selection window will bedisplayed on the screen, please move the pointer toinput source desired by pressing the Point ed buttonsand press the SELECT button. And then follow theinput signal guidance window to correct the signal andconnection.If the projector is locked with a PIN code, PIN codeinput dialog box will appear. Enter the PIN code asinstructed on the next page.5Video / PC selection windowVideo / PC selection windowInput signal guidance windowInput signal guidance window15Lamp control status