Sanyo PDG-DWL2500 Owner's Manual

Also see for PDG-DWL2500 - 2500 Lumens: Specifications Specifications Dimensional drawing Specifications Specifications

Contents

33Computer InputAuto PC adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal , Verticaland Clamp position to conform to your computer.PC adjust MenuAuto PC adjustmentTo store adjustment parametersThe adjusted parameters from the Auto PC adjustment canbe stored in the projector. Once the parameters are stored,the setting can be done just by selecting a Mode (1–10) inthe PC System Menu (See page 32). See also “Store” onpage 35.4Note:• Fine sync, Total dots, Horizontal and Verticalposition of some computers can not be fully adjustedwith the Auto PC adjustment function. When the imageis not provided properly with this operation, manualadjustments are required (pp.34-35).• The Auto PC adjustment can not be operated when480i, 575i, 480p, 575p, 720p or 1080i is selected in thePC System Menu (p.32) , or when the signal is comingfrom the HDMI terminal.Press the MENU button to display the On-ScreenMenu. Use the Point ed buttons to select PC adjustand then press the Point 8 or the SELECT button.12 Use the Point ed buttons to select Auto PC adj andthen press the SELECT button.Use Point ed buttons to select Auto PCadj and press the SELECT button.Please wait appears while the Auto PCadjustment is in process.Menu OperationAuto PC adj