Sanyo PDG-DWL2500 Owner's Manual

Also see for PDG-DWL2500 - 2500 Lumens: Specifications Specifications Dimensional drawing Specifications Specifications

Contents

52This function is used to memorize the Zoom adjustment withthe ZOOM +/- buttons on the top control (p.25).Press the Point ed buttons to select Reset, Store1 orStore2.Reset . . . Reset the Zoom adjustment when the projector isturned off or the AC power cord is unplugged.Store1 . . Store the Zoom setting even when the projectoris turned off. Zoom setting is cleared when theAC power cord is unplugged.Store2 . . Store the Zoom setting even when the AC powercord is unplugged.3D settingSettingThis function is used to set the 3D display function. (pp.48-49) Press the Point ed buttons to switch between eachoption.3D ............. Set to "On" to activate the 3D display functionand the 3D indicator turns blue.3D sync .... If you see a discrete or overlapping image, 3DSync Invert function* enables you to get thecorrect image. Switch the 3D sync signal to 1 or2.3D->2D ..... When viewing the 3D contents without wearingthe 3D glasses, set to "On" to convert 3Ddisplay format to 2D display format.3D phase... Adjust the phase of the 3D sync signal whenthe 3D SYNC OUT terminal is used. (0 - 31)* The Frame Sequential Format is a technology thatrapidly alternates between left-eye and right-eye images.When right-eye image and left-eye image are switchedor you feel like you cannot get 3D effect due to out-of-synchronization state, first try to synchronize the projectorwith the 3D glasses by using 3D SYNC function.3D settingZoom