Sanyo PDG-DWL2500 Owner's Manual

Also see for PDG-DWL2500 - 2500 Lumens: Specifications Specifications Dimensional drawing Specifications Specifications

Contents

2Choose Computer 1(Component) or Computer 1(Scart)by pressing the the COMPONENT or COMPUTER 1 buttonon the remote control; choose HDMI by pressing the HDMIbutton on the remote control.Before using these buttons, correct input source should beselected through Menu operation as described below.1Input Menu2 Use the Point ed buttons to select Computer 1 andthen press the Point 8 button; use the Point edbuttons to select Component or RGB(Scart) and thenpress the SELECT button.Input Source Selection (Component, Scart, HDMI)When the input source is coming from videoequipment connected to the COMPUTERIN 1/COMPONENT IN terminal with aComponent-VGA Cable, select Component.ComponentWhen the input source is coming from videoequipment connected to the COMPUTERIN 1/COMPONENT IN terminal with a Scart-VGA Cable, select RGB (Scart).RGB (Scart)Press the MENU button to display the On-ScreenMenu. Use the Point ed buttons to select Input andthen press the Point 8 or the SELECT button.4Note:When the Input Search function is set to On 1 or On 2 inthe Auto setup function, the input signal will be searchedautomatically (p.51).COMPUTER 1 buttonRemote ControlUse the Point ed buttons to select HDMI, and thenpress the SELECT button;Computer 1 (RGB)Computer 1 (Scart)COMPONENT buttonComputer 1(Component)Video InputHDMI buttonHDMIWhen the video signal is connected to theHDMI terminal, select HDMI.HDMIDirect OperationMenu OperationOR