Sanyo PLC-EF60 Owner's Manual

Also see for PLC-EF60: Specifications Service manual

Contents

12PreparationANALOG OUTINPUT 3INPUT 1INPUT 2ANALOG INDIGITAL (DVI-D)AUDIO 1AUDIO 2VIDEO/Y Cb/Pb Cr/PrG B R H/V V VIDEO/Y Cb/Pb Cr/PrS-VIDEOR-AUDIO-L(MONO)Terminalsqwere INPUT 3 terminalsAUDIO (R-L)Connect the audio output from video equipmentconnected to VIDEO/Y Cb/Pb Cr/Pr jacks or S-VIDEOjack to these jacks. (When the audio output ismonaural, connect it to L(MONO) jack. (p24, 25)VIDEO/Y, Cb/Pb, and Cr/PrConnect video or component output (Y, Cb/Pb andCr/Pr) from video equipment to these jacks with avideo cable (RCA-type). (p24, 25)S-VIDEOConnect S-Video output from video equipment to thisjack. (p24)r INPUT 2 terminalsAUDIO 2Connect the audio output from video equipmentconnected to VIDEO/Y, Cb/Pb, and Cr/Pr jacks or G,B, R, H/V, and V jacks to this jack. (p22, 25)VIDEO/Y, Cb/Pb, and Cr/PrConnect video or component output (Y, Cb/Pb andCr/Pr) from video equipment to these jacks with avideo cable (BNC-type). (p25)G, B, R, H/V, and VConnect RGB output signal from a computer with acomputer cable (5 BNC-type) to these jacks. (p22)w ANALOG OUTThis terminal can be used for analog signal outputincoming through the ANALOG IN terminal (INPUT 1).Connect this terminal to the other monitor with a VGAcable. (p22)q INPUT 1 terminalsAUDIO 1Connect the audio output from a computer or videoequipment connected to DIGITAL (DVI-D) or ANALOGIN terminal to this jack. (p22, 24)DIGITAL (DVI-D) (HDCP compatible)Connect digital output signal from a computer orvideo equipment to this terminal with a DVI-D cable.(p22, 24)ANALOG INConnect analog output signal from a computer or avideo equipment (Component or RGB Scart) to thisterminal with a VGA cable, a Scart-VGA or aComponent-VGA cable. (p22)