26Operating the ProjectorYou can operate the projector with the projector's top control, the remote control or a USB mouse (not provided). Theremote control is available as wireless and wired.Operational range of the wireless remote control is within about 32.8' (10m) from the projector. Operational range differsdepending on environments where the projector is used. Any obstruction to air signal between the projector and theremote control may prevent the remote control from working properly.The wireless remote control does not workwhen the remote control cable isconnected to either the projector or theremote control. Remove the remotecontrol cable from both of the projector andthe remote control when using it aswireless.Wireless Remote Control OperationProjector Top Control OperationMouse OperationConnect the R/C JACK on the projector and the remotecontrol with the remote control cable when operatingthe remote control as wired.Connect the USB terminal on the projector and a USBmouse when operating the projector's menu with theUSB mouse. A mouse cursor will appear on thescreen with the mouse connected.Mouse operation offers the On-Screen Menu controlonly. Other operations are unavailable with the USBmouse. For details of the mouse operation, refer topage 34~35.Wired Remote Control OperationR/C jackRemote controlcableUSB terminalBasic Operation