Sanyo PLC-EF60 Owner's Manual

Also see for PLC-EF60: Specifications Service manual

Contents

41Move the yellowframe pointer to theAuto PC adj. andpress the SELECTbutton.PC Adjust MenuPC ADJ. iconTo store adjustment parametersAdjustment parameters from Auto PC Adjustment can bememorized in this projector. Once parameters are memorized, thesetting can be done just by selecting Mode in the System menu(p39). See Store on page 43.✔Note:• Fine sync, Total dots and Picture Position of some computers can not be fullyadjusted with this Auto PC Adjustment function. When the image is not providedproperly with this operation, manual adjustments are required. (p42, 43)• Auto PC Adjustment function cannot be operated in Digital Signal input on DVIterminal and “480i”, “575i”, “480p”, “575p”, “720p (HDTV)”, “1035i (HDTV)”,“1080i/50 (HDTV)” or “1080i/60 (HDTV)” is selected on the System menu (p40).12 Move the yellow frame pointer to Auto PC adj. and thenpress the SELECT button twice.This Auto PC Adjustment can be also executed by pressingthe AUTO PC ADJ. button on the top control or the AUTOPC button on the remote control unit. (p15, 31)Auto PC adj.selects Auto PC adj., Fine sync, Total dots, Current mode, Clamp, Displayarea, Position, V -sync phase, Reset, and Mode.Press the MENU button to display On-Screen Menu. Spinthe menu icons with the Control pad and press the SELECTbutton when the PC ADJ. icon comes right in front.Auto PC AdjustPC AdjustmentComputer AdjustmentComputer Adjustment