Sanyo PLC-EF60 Owner's Manual

Also see for PLC-EF60: Specifications Service manual

Contents

45Image Adjustment12Decrease or increase contrast with the Control pad.(From 0 to 63.)Adjust image darker or brighter with the Control pad.(From 0 to 63.)ContrastBrightnessLighten or deeper color with the Control pad.(From 0 to 63.)Adjust with the Control pad to obtain proper color.(From 0 to 63.)ColorTintImage AdjustImage Adjust MenuColor managementThe Color management function enables you to adjust color level,phase and gamma of the selected spot of the projected image andexchange the original color with the adjusted one.The projector can store up to eight color management data.adjusts Contrast, Brightness, Color, Tint, Color management, Auto picturecontrol, Color temp., Red, Green, Blue, Sharpness, Gamma, Noise reduction,Progressive, Film, and selects Reset and Store.Pointer(yellow frame)Softly tap the Controlpad or grind yourfinger on the Controlpad to move thepointer.Indicates the otheritems exists below.Item dataAdjust value with theControl pad.Press the MENU button to display On-Screen Menu. Spinthe menu icons with the Control pad and press the SELECTbutton when the IMAGE ADJ. icon comes right in front.Move the yellow frame pointer with the Control pad to anitem which you want to adjust.Press the SELECT button to display an adjustment dialogbox. Adjust value with the Control pad.3Image AdjustmentIMAGE ADJ. icon✔Note:• Color and Tint cannot be displayed when PC input source is selected.• Tint cannot be adjusted when the video system is PAL, SECAM, PAL-M or PAL-N.(p40)Color selectionPress the SELECT button when Color management ishighlighted and then Color management pointer will appear.Move the pointer to a spot which you want to adjust the colorof with the Control pad, and press the SELECT button. Theimage being projected freezes and Color Selection window willappear.X-axis of COLOR pallet shows Phase and Y-axis, Level.Select a level and phase which you prefer with the Control padand press the SELECT button to move the pointer to GAMMA.Select a position of GAMMA which you prefer with the Controlpad and press the SELECT button.While adjusting COLOR and GAMMA, the projected imagecolor will change accordingly.Color management pointerMove the pointer to a spot which youwant to adjust the color of and thenpress the SELECT button. ColorSelection window will appear asbelow.Color selectionPointer(red frame)