Sanyo PLC-EF60 Owner's Manual

Also see for PLC-EF60: Specifications Service manual

Contents

31Basic OperationInformationChoose either Input 1, Input 2, Input 3, Input 4, or Input 5 bypressing the INPUT button on the top control or the INPUT 1,INPUT 2, INPUT 3, INPUT 4, or INPUT 5 button on the remotecontrol.Before using these buttons, correct input source should beselected through menu operation as described on p37~38.Input 1Input 3Input 2INPUT buttonInput 5Input 4Auto PC Adjustment function is provided to automatically adjustFine sync, Total dots, Horizontal, and Vertical picture position toconform to your computer by just pressing the AUTO PC ADJ. onthe top control or the AUTO PC button on the remote control.Information display can be used to confirm the current operatingcondition of the projector and the signal being projected throughthe projector.Press the INFO button to display Information window on screen.To hide the Information window, press the INFO button again.Use this menu to check the projector's operating condition whenyou face troubles in operation. Refer to the Information menu onpage 61.✔Note:• Fine sync, Total dots and Picture Position of some computers can not be fullyadjusted with this Auto PC Adjustment function. When the image is not providedproperly with this operation, manual adjustments are required. (p42, 43)• Auto PC Adjustment function cannot be operated in Digital Signal input on DVIterminal and “480i”, “575i”, “480p”, “575p”, “720p (HDTV)”, “1035i (HDTV)”,“1080i/50 (HDTV)” or “1080i/60 (HDTV)” is selected on System menu (P40).Auto PC AdjustmentInput SelectionBasic Operation