Sanyo PLC PLC-XP100BKL Owner's Manual

Contents

Sanyo PLC PLC-XP100BKL Owner's Manual Manual pdf 22 page image

This projector uses nominal input voltages of 100–120 V or 200–240 V AC and it automatically selects the correct input voltage. Itis designed to work with single-phase power systems having agrounded neutral conductor. To reduce the risk of electrical shock,do not plug into any other type of power system.If you are not sure of the type of power being supplied, consultyour authorized dealer or service station.Connect the projector with all peripheral equipment before turningon the projector.CAUTIONFor safety, unplug the AC power cord when the projector is notin use. When the projector is connected to an outlet with ACpower cord, it is in stand-by mode and consumes a little electricpower.Connecting the AC Power CordConnect the AC power cord (supplied) to theprojector.The AC outlet must be near this equipment andmust be easily accessible.InstallationNOTE ON THE POWER CORDAC power cord must meet the requirements of the country where you use the projector.Confirm the AC plug type with the chart below and proper AC power cord must be used.If the supplied AC power cord does not match your AC outlet, contact your sales dealer.Projector side AC Outlet sideTo POWER CORDCONNECTOR on yourprojector.GroundTo the AC Outlet.(10 V AC)For Continental EuropeFor the U S A and Canada For the U KTo the AC Outlet.(00–40 V AC)To the AC Outlet.(00–40 V AC)