Sanyo PLC PLC-XP100BKL Owner's Manual

Contents

Sanyo PLC PLC-XP100BKL Owner's Manual Manual pdf 63 page image

6The WARNING indicators show the state of the function which protects the projector. Check the state of theWARNING indicators and the POWER indicator to take proper maintenance.Warning IndicatorsThe projector is shut down and the WARNING TEMP.indicator is blinking red.When the temperature inside the projector reaches acertain level, the projector will be automatically shut downto protect the inside of the projector. The LAMP indicatorturns red and the WARNING TEMP indicator blinks whilethe projector is being cooled down. When the projector hascooled down enough (to its normal operating temperature),it can be turned on again by pressing the ON/STAND-BYbutton.✔Note:• The WARNING TEMP. indicator continues to blink even after thetemperature inside the projector returns to normal. When theprojector is turned on again, the WARNING TEMP. indicator stopsblinking.Then check the matters below:– Did you provide appropriate space for the projector to beventilated? Check the installing condition to see if the airvents of the projector are not blocked.– Has the projector been installed near an Air-Conditioning/Heating Duct or Vent? Move the installation of theprojector away from the duct or vent.– Is the filter clean? Replace the filter with a new one.The projector is shut down; and the LAMP indicator islighting and other four indicators are blinking.When the projector detects an abnormal condition, it willbe automatically shut down to protect the inside of theprojector and the LAMP indicator lights on and other fourindicators blink. In this case, unplug the AC power cord andplug it, and then turn on the projector once again to verifyoperation. If the projector cannot be turned on and theseindicators are still lighting and blinking, unplug the AC powercord and contact the service station.CAUTIONDO NOT LEAVE THE PROJECTOR WITH THEAC POWER CORD CONNECTED UNDER ANABNORMAL CONDITION. IT MAY RESULT IN FIREOR ELECTRIC SHOCK.Top PanelLAMP indicator lights onand other four indicatorsblinkTop PanelWARNING TEMPblinking redMaintenance and Care