Sanyo PLC PLC-XP100BKL Owner's Manual

Contents

Sanyo PLC PLC-XP100BKL Owner's Manual Manual pdf 45 page image

45Press the MENU button to display the On-Screen Menu. Usethe Point 7 8 buttons to move the red frame pointer to theImage Adjust Menu icon.12 Use the Point ed buttons to move the red frame pointer tothe desired item and then press the SELECT button to displaythe adjustment dialog box. Use the Point 7 8 buttons toadjust the setting value.IMAGE ADjUST MENUPress the Point 7 button to decrease contrast; press the Point 8button to increase the contrast (from 0 to 63).Press the Point 7 button to decrease the brightness; press thePoint 8 button to increase the brightness (from 0 to 63).ContrastBrightnessPress the Point 7 button to decrease the intensity of the color;press the Point 8 button to increase the intensity of the color (from0 to 63).Press the Point 7 8 buttons to adjust the tint value to obtainproper color balance (from 0 to 63).Color ✽Tint ✽Color ManagementThe Color Management function can be used to adjust the LEVEL,PHASE, and GAMMA of the selected display colors (except forblack, white, and gray) on the screen and replace these colors withother colors if required.You can store up to eight (8) color management data.1 Use the Point ed buttons to move the red frame pointer toColor Management, and then press the SELECT button. Theprojected image freezes, and the COLOR MANAGEMENTPOINTER appears.Use the Point ed7 8 buttons to move the pointer to thespot where you want to adjust the color and then press theSELECT button. The COLOR SELECTION window appears,and the color in the center of the pointer is selected and youcan adjust the color.2Use the Point ed7 8 buttons to adjust the LEVEL andPHASE of the color, and then press the SELECT button toconfirm the setting. Then use the Point ed buttons to adjustthe GAMMA for the color and press the SELECT button toaccept the setting. After adjusting, press the SELECT buttonto go to the COLOR MANAGEMENT LIST.3COLOR MANAGEMENTPOINTERPOINTER MODEImage AdjustmentMove the red frame pointer to the desireditem and then press SELECT button.Image Adjust Menu iconUse the Point 7 8 buttons to adjust thesetting value.COLOR SELECTION MODEGo to the COLOR MANAGEMENT LIST.LISTPicture Image✔Note:• Displayed only in Video Input.• Tint cannot be selected when the video systemis PAL, SECAM, PAL-M, or PAL-N (p.41).✽