Sanyo PLC PLC-XP100BKL Owner's Manual

Contents

Sanyo PLC PLC-XP100BKL Owner's Manual Manual pdf 29 page image

9Press the NO SHOW button on the remote control to blackout the image. To restore to normal, press the NO SHOWbutton again or press any other button.NO SHOW buttonFILTER buttonPress and hold the FILTER button for more than five secondsto operate electrically operated filter to replace the filter.KEySTONE buttonReduce the upper width withPoint e button.Reduce the lower widthwith Point d button.Reduce the left part withPoint 7 button.Reduce the right part withPoint 8 button.• The white arrows indicate that there is no correction.• A red arrow indicates the direction of correction.• An arrow disappears at the maximum correction.• If you press the KEYSTONE button on the remotecontrol again while the Keystone dialog box is beingdisplayed, the keystone adjustment will be canceled.• “Keystone” disappears after 10 seconds.Press the P-TIMER button on the remote control. The Timerdisplay “00 : 00” appears on the screen and starts to counttime (00 : 00–59 : 59).To stop the P-TIMER, press the P-TIMER button.To cancel the P-TIMER, press the P-TIMER button again.P-TIMER buttonP-Timer displayPOINTER buttonPress POINTER button on the remote control to display thePointer on the screen.Remote ControlPOINTERbuttonP-TIMERbuttonFILTERbuttonNO SHOWbutton✔Note:• See the previous page for thedescription of other buttons.KEySTONEbuttonMove the pointer on the screen with this button.MOUSE POINTER buttonMOUSEPOINTERbuttonPress the KEYSTONE button on the remote control. The“Keystone” appears on the screen.Use the Point ed7 8 buttons to correct keystonedistortion. The keystone adjustment can be stored (pp.40,44).“No show” disappears after 4 seconds.Basic Operation