Sanyo PLC-SW35 Owner's Manual

Contents

26Computer InputAuto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform toyour computer. Auto PC Adjustment function can be operated as follows.Move the red frame pointer tothe Auto PC Adj. icon andpress the SELECT button.PC Adjust MenuPC Adjust Menu iconTo store adjustment parametersAdjustment parameters from Auto PC Adjustment can bememorized in this projector. Once parameters are memorized, thesetting can be done just by selecting Mode in the PC SystemMenu (p25). See “Store” on page 28.✔Note:• Fine sync, Total dots and Picture Position of some computers can not be fullyadjusted with this Auto PC Adjustment function. When the image is not providedproperly with this operation, manual adjustments are required. (p 25, 27, 28)• The Auto PC Adjust cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i,or 1080i is selected in the PC System Menu.Auto PC AdjustmentPress the MENU button to display the On-Screen Menu.Press the Point 7 8 button to move the red frame pointer toPC Adjust Menu icon.12 Press the Point d button to move the red frame pointer toAuto PC Adj. icon and then press the SELECT button twice.This Auto PC Adjustment can be also executed by pressingthe Auto PC button on the remote control unit.Auto PC Adj.