Sanyo PLC-SW35 Owner's Manual

Contents

9Part Names and FunctionsA built-in micro processor which controls this unit may occasionallymalfunction and need to be reset. This can be done by pressing the RESETbutton with a pen, which will shut down and restart the unit. Do not use theRESET function excessively.Rear TerminalMONITOR OUTAUDIO INVIDEO SERVICE PORTRESETCOMPUTER / S-VIDEO/COMPONENT INAUDIO OUT(VARIABLE)q w e rtyw AUDIO IN (Stereo)Connect the audio output from computer or videoequipment connected to q or y to this jack. (p15, 16)t MONITOR OUTThis terminal outputs the signal coming fromCOMPUTER / S-VIDEO / COMPONENT IN terminal.(This terminal cannot output RGB(Scart) signal fromCOMPUTER / S-VIDEO / COMPONENT IN terminal.)(p15)y COMPUTER / S-VIDEO / COMPONENT INConnect S-video output, RGB Scart 21-pin video output,component video output or computer output to thisconnector. (p15)e AUDIO OUT(VARIABLE)Connect an external audio amplifier to this jack.(p15, 16)This terminal outputs sound from AUDIO IN terminal.Part Names and Functions✽q VIDEOConnect the composite video output from videoequipment to VIDEO jack. (p16)✽r SERVICE PORTThis jack is used to service this projector.✔Note:• Audio out and Monitor out terminal works only when the projector is under operation and do not work when the projector is in stand-by state or Powermanagement mode (p41).