Sanyo PLC-SW35 Owner's Manual

Contents

32Press the MENU button and the On-Screen Menu willappear. Press the Point 7 8 button to move the red framepointer to the Input Menu icon.1Press the Point dd button to move the red arrow pointer toVIDEO or COMPUTER and then press the SELECT button.The Source Select Menu will appear. When you selectVIDEO, video input is selected. When you selectCOMPUTER, go to step 3 to select input source.2Move the pointer to the correct input source and then pressthe SELECT button.3Move the pointer (red arrow)to Computer and press theSELECT button.Input MenuInput Menu iconComputerVideoINPUT buttonInput Source SelectionDirect OperationMenu Operation✔Note:• S-Video-VGA Cable, Component-VGA Cable and Scart-VGA Cable are optionallysupplied. See page 57 for order.Choose either VIDEO or COMPUTER by pressing the INPUTbutton on the top control or VIDEO or COMPUTER button on theremote control.Before using these buttons, correct input source should beselected through menu operation as described below.ComputerMove the pointer to S-Video,Component, RGB (Scart) andpress the SELECT button.Source Select MenuWhen the input source is connected to theCOMPUTER / S-VIDEO / COMPONENT IN witha S-Video-VGA Cable, select S-Video.S-VideoWhen the input source is coming from videoequipment connected to the COMPUTER / S-VIDEO / COMPONENT IN with a Scart-VGACable, select RGB (Scart).RGB (Scart)When the input source is coming from videoequipment connected to the COMPUTER / S-VIDEO / COMPONENT IN with a Component-VGA Cable, select Component.ComponentP-TIMERFREEZECOMPUTER VIDEOSELECTD.ZOOMMUTEVOLUME -MENUNO SHOWIMAGEVOLUME +KEYSTONEAUTO PCON-OFFVIDEObuttonCOMPUTERbuttonRemote ControlPOWER LAMPREPLACEWARNINGINPUTMENUON-OFFSELECTVOLUME–VOLUME+INPUTbuttonVideo Input