Sanyo PLC-SW35 Owner's Manual

Contents

31Computer InputThis projector has a picture screen resize function, which enables you to display the desirable image size.Press the MENU button and the On-Screen Menu willappear. Press the Point 7 8 button to move the red framepointer to the Screen Menu icon.1Move the red frame to thefunction and press the SELECTbutton.Press the Point dd button and move the red frame pointer tothe function that you want to select and then press theSELECT button.2✔Note:• This Screen Menu cannot be operated when “720p(HDTV)”, “1035i (HDTV)”, or“1080i (HDTV)” is selected in the PC System Menu (p25).• The True and Digital Zoom +/– cannot be selected when “480i”, “575i”, “480p”,or “575p” is selected in the PC System Menu (p25).• This projector cannot display any resolution higher than 1280 x 1024. If yourcomputer’s screen resolution is higher than 1280 X 1024, reset the resolution to thelower before connecting to the projector.• The image data in other than SVGA (1280 x 1024) is modified to fit the screen sizein initial mode.• The panning function may not operate properly if the computer system prepared inthe PC Adjust Menu is used.Screen MenuScreen Menu iconScreen Size AdjustmentWhen the Digital Zoom + is selected, the On-Screen Menudisappears and the message “D. Zoom +” is displayed. Press theSELECT button to expand the image size. And press the Pointeedd7 8 button to pan the image. The Panning function can workonly when the image is larger than the screen size.A projected image can be also expanded by pressing the D.ZOOM▲ button on the remote control.To exit the Digital Zoom +/– mode, press any button except theD.ZOOM ▲▼, SELECT, and Point button.WideDigital Zoom +Provides image to fit screen size.NormalTrueWhen the Digital Zoom – is selected, the On-Screen Menudisappears and the message “D. Zoom –” is displayed. Press theSELECT button to compress the image size.A projected image can be also compressed by pressing theD.ZOOM ▼ button on the remote control.Digital Zoom –Provides image in its original size. When the original image size islarger than the screen size (800 x 600), this projector enters“Digital zoom +” mode automatically.Provides image to fit wide video aspect ratio (16 : 9) by expandingimage width uniformly. This function can be used for providing asqueezed video signal at 16 : 9.To return to the normal screen, press KEYSTONE button or D.ZOOM ▲▼ button or select Normal from the Screen menu.Computer Input