PLC-WK2500 Expand Serial Command Functional Specifications31 / 748.7.3 CF_VSCALE CommandCommand “CF_VSCALE_%1”[CR]%1“032” --------- +32“031” --------- +31“002” --------- +2“001” --------- +1“000” --------- +0“-01” ---------- -1“-02” ---------- -2“-31” ---------- -31“-32” ---------- -32“UP” ---------- Vertical Scale setting value + 1“DN” ---------- Vertical Scale setting value - 1DetailsSet Vertical ScaleThis command is available in normal Power ON status.Note1) When Screen setting is not in Custom mode, projector changes imagemode into Custom by receiving this command.Note2) When there is no signal detected, projector returns 101 and the commanddoes not execute.Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]8.7.4 CF_VPOS CommandCommand “CF_VPOS_%1”[CR]%1“015” --------- +15“014” --------- +14“002” --------- +2“001” --------- +1“000” --------- +0“-01” ---------- -1“-02” ---------- -2“-14” ---------- -14“-15” ---------- -15“UP” ---------- Vertical Position setting value + 1“DN” ---------- Vertical Position setting value – 1DetailsSet Vertical PositionThis command is available in normal Power ON status.Note1) When Screen setting is not in Custom mode, projector changes imagemode into Custom by receiving this command.Note2) When there is no signal detected, projector returns 101 and the commanddoes not execute..Acceptable “000”[CR]ResponseUnacceptable “Error Code”[CR]
