Sanyo PLC-XF20 Owner's Manual

Also see for XF20 - PLC XGA LCD Projector: Specifications Instruction manual Service manual

21MENU BARSYSTEM MENUUsed to select acomputer system.(Refer to P28)IMAGE MENUUsed to adjust thecomputer image.[Fine sync / Total dots /White Balance / Contrast /Brightness / Sharpness/Gamma/Progressive](Refer to P32)PC ADJUST MENUUsed to adjust theparameters tomatch with the inputsignal format.(Refer to P30, 31)SETTING MENUSCREEN MENUUsed to adjust thesize of the image orto correct theKeystone distortion.(Refer to P34)LANGUAGE MENUUsed to selectthe languageused in theMenu.(Refer to P41)SOUND MENUUsed to adjust thesound [Volume,Bass or Treble], toselect Built-in SPOn-Off and SoundMute.(Refer to P26)BEFORE OPERATIONPOSITION MENUUsed to adjust theposition of theimage.(Refer to P33)MENU BAR IN COMPUTER MODEWHEN SELECT THE HDB 15-PIN TERMINALWHEN SELECT THE DVI TERMINALWHEN SELECT THE 5 BNC TERMINAL AND RGB INPUT SELECTINPUT MENUUsed to selectthe Inputsource. (Referto P26)INPUT SOURCE MENUUsed to select acomputer signal type(Digital or Analog).Refer to P27Used to set the DisplayMenu, other functionssetting and reset LampReplacement MonitorTimer. (Refer to P39-41)INPUT SOURCE MENUUsed to select a input sourcetype. (RGB or Y, Pb/Cb, Pr/Cr)(Refer to P27)42 RGBD-XGAXGA 1XGA 1