Sanyo PLC-XF20 Owner's Manual

Also see for XF20 - PLC XGA LCD Projector: Specifications Instruction manual Service manual

32Press the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to select IMAGEand press the SELECT button. Another dialog box PICTUREIMAGE ADJUSTMENT Menu will appear.When selecting “” the custom setting dialog box will appear. Movethe arrow to the item that you want to change by pressing the POINTUP/DOWN button, and adjust each value by pressing the SELECTbutton to match with the image.12Adjust the picture as necessary to eliminate flicker from the display.(From 0 to 255.)The number of the total dots in one horizontal period. Adjust thenumber to match your PC image.Point to to decrease contrast, and select to increase contrast.(From 0 to 63.)Point to to adjust the image darker, and select to adjustbrighter. (From 0 to 63.)Close the PICTURE IMAGEADJUSTMENT Menu.Move the arrow to or and pressSELECT button.Recalls the data previously adjusted.ResetStores the adjusted data in the memory.StoredCloses the PICTURE IMAGE ADJUSTMENT Menu.QuitMove the arrow to the color that you want to adjust. Point to tolighten the color and select to deepen the color. (From 0 to 63.)Each of the keys operates as follow.Fine syncTotal dotsWhite balance (Red / Green / Blue)ContrastBrightnessPoint to to soften the image, and select to sharpen the image.(From 0 to 15.)SharpnessPICTURE IMAGE ADJUSTMENTSNOTE : The Fine sync and the Total dots cannotbe operated when the input signal is digitalfrom DVI terminal or “RGB” is selected onthe SYSTEM MENU (P28 and 29).The Progressive cannot be selected whenthe input signal is digital from DVI terminalor “480p”, “575p” or “HDTV720p” isselected on the SYSTEM MENU (P28 and29).Press the POINT DOWN button and a red-arrow icon willappear. Move the arrow to the function that you want to selectand then press SELECT button.Normal picture level preset on this projector. This picture level canbe set by pressing the NORMAL button.StandardPicture level adjusted for the picture with fine tone.RealPicture level adjusted manually in the custom setting dialog box.CustomMove the arrow to the leveland press the SELECTbutton.Press the SELECT buttonat “” to adjust the picturelevel manually.The level being selected.COMPUTER MODEGammaSet “On” to provide progressive scan mode.ProgressivePress the SELECTbutton to set thefunction “On” or “Off”.Point to or to obtain better balance of contrast. (From 0 to 16.)